We specialize in derivatives of galvanized, stainless HV strips of all forms and qualities, from 4 mm in width and above.
Pre-ordered sheets and plates, virtually with no scrap material, with thickness ranging from 0,35 to 6 mm, from small plates and disks to larger formats.
GALVANIZED SHEETS AND STRIPS
Hot rolled galvanized (+Z…), aluminized (+AS…), aluzinc (+AZ…) sheets
Quality: DX51D, DX52D, DX53D, DX54D, DX56D ( EN 10327/ EN 10143 )
Zinc coating: min. Z50 g/m2,max. Z450 g/m2
Thickness: min, 0,40 mm,max. 3,00 mm
Formats: 1000 x 2000, 1250 x 2500, 1500 x 3000 mm
-Electrolytic galvanized sheets (EN 10152)
Quality: DC01 – DC05 +ZE25/25, ZE50/50, ZE75/75; ZE100/100
Thickness: min. 0,50 mm, max. 3,00 mm
Formats:1000 x 2000, 1250 x 2500, 1500 x 3000 mm
Usage: for cold molding and subsequent painting (lamination).
-Our standard tin plate program includes coiled sheet in size of 0.55 x 1000/1250 mm, DX 51/DX 52 quality, with 275 g/m2 of zinc. We also supply customized sheets in various sizes and sheets cut in plates with different thickness of zinc coatings.
We supply sheets and strips for standard tinsmith production and strips used in production of spiro tubes for air conditioning.
Aluminized sheet EN 10154
– Cold rolled galvanized steel sheet DX51D with 90% aluminium and 10% silica coating on both sides, with 15 to 205 microns per side (from 100 to 140 g/m2).
Application: for high temperatures from 600 to 800 degrees Celsius, with improved anti-corrosion properties
Usage: vehicle exhaust pipes, heat exchangers, toasters, stoves, furnaces, heaters, uptakes, spiro tubes, ventilation systems…
Thickness: from 0,40 to 3,00 mm
Commercial width: 1000; 1250; 1500 mm
Alu zinc sheet EN 10215
– Cold rolled sheet with double-sided coating of 55% Al, 1,5% Si, 43,5% Zn alloy.
As a base sheet used:
a) a) For extraction, shaping and bending DX51D+AZ; DX52D+AZ; DX54D+AZ according to EN 10215
b) b) For structural use, profiling: S250GD+AZ; S280GD+AZ; S320GD+AZ according to EN 10215
Thickness: from 0,40 to 2,50 mm
Width: max.1500 mm
Tags for application: AZ100; AZ 150; AZ 165; AZ 200
Application: 4-5 times improved anti-corrosion properties compared to ordinary galvanized sheet.
Usage: construction metalwork, roofing for industrial halls, air-conditiong covers, home appliances.
Not recommended for: wet concrete, lead and copper, acidic environments with pH >8, dwellings for livestock, temperatures above 330 degrees Celsius
Hot rolled strip, alkalized
– Hot rolled strip of soft steels, alkalized for cold molding (EN 10111, EN 10051)
Quality: DD11+P, DD12+P, DD13+P, DD14+P
Thickness: min. 1,50 mm, max. 8 mm
Width: min. 20 mm, max. 1500 mm
– Hot rolled strip, firm, alkalized for cold molding (EN 10149-2)
Quality: S315MC, S355MC, S420MC, S460MC, S550MC, S600MC
Thickness: min. 2,00 mm, max. 1500 mm
Width: min. 20 mm, max. 1500 mm
STEEL SHEET FOR ENAMELLING
Cold rolled strips of soft steel for deformation and enamelling EN 10131 (EX 10209), DC 01EK and DC 04EK
Thickness: from 0,50 mm to 3,00 mm Application: Length: 4-8 m and rolled Tubes can be supplied as following: Basic material: cold rolled strip DC 01; DC 03 and DC 04 according to EN 10130, thickness from 0,70 to 1,50 mm PROPELLER SHAFTS: cold rolled and sanded bars (tolerance h8) of seawater resistant stainless steel. Shafts can be supplied according to technical documentation of the client, or according to specific requirements.
Width: 1000; 1250; 1500 or custom made (according to precise measurements supplied by the buyer, e.g. 0,80x780x1340)
Quality: AISI 316L ili AISI 630 povišene čvrstoće (“REMANIT”)
Length: 4-8 m and rolled
Tubes can be supplied as following:
Basic material: cold rolled strip DC 01; DC 03 and DC 04 according to EN 10130, thickness from 0,70 to 1,50 mm
PROPELLER SHAFTS: cold rolled and sanded bars (tolerance h8) of seawater resistant stainless steel.
Shafts can be supplied according to technical documentation of the client, or according to specific requirements.